Calculate or 
Optimise.After you have entered the stop-off points and the settings, begin route planning on the toolbar using Calculate or Optimise.
If the sequence of the specified stop-off points are not to be optimised, start the route planning with Calculate or with the F9 key.
Alternatively, you can start the route calculation by clicking on the Itinerary, Costs, Emissions, Report
Tip: You can calculate up to three alternative routes.
The stop-off points are listed in the sequence in which they were entered. If three or more stop-off points are entered, the sequence of stop-off points can be entered, thus optimising the route.
PTV Map&Guide intranet checks the sequence which provides the best route. The stop-off points are sorted accordingly and the route is calculated.
Note: The sequence optimisation includes driving breaks and rest periods as well as time slots if these routing options are enabled (see Specifying settings for route planning).
Enter your stop-off points.
On the toolbar click Optimise.
The sequence of stop-off points is optimised.
You can define how and for which stop-off points in the list the sequence is optimised and if the route planning should start directly.
On the toolbar click the small arrow next to Optimise
The selection menu Optimisation settings opens.
Make the required settings.
| Element | Description |
|---|---|
| Direct distance option | This process optimises stop-off points using direct distances only. |
| According to road kilometres option |
This process calculates the actual distance between the stop-off points in road kilometres/miles and uses this as the basis for optimisation. Road kilometres/miles are calculated using the selected vehicle. This optimisation process takes longer but is more accurate. |
| Stop-off points | Specify from which and to which stop-off point the sequence should be optimised. |
| Option Calculate according to route optimisation. |
If you remove the check, when you click on |
|
Copyright © 2019 PTV AG | Legal notice |